June 10, 2020
The COVID-19 pandemic has increased the global demand for hand sanitizer and surface disinfectants. Have you considered converting or increasing […]
May 13, 2020
As the sole Quattroflow distributor for the greater Midwest, Holland Applied Technologies is pleased to announce the launch of the […]
January 31, 2020
Holland Applied Technologies is very excited to announce that we are now the sole authorized distributor for PSG Dover’s Quattroflow […]
July 30, 2019
Our last blog post we looked at a case study where we were seeing a lot of slip in a […]
July 30, 2019
A few months back we looked at the various clearance options available on a Waukesha Cherry-Burrell Universal 1, 2, & […]
April 26, 2019
Today, we give you even more information on PD pump rotor clearances. Below is an easy to use chart that […]
March 29, 2019
In today’s post, we are going to look at the different clearance options that are available on a Waukesha Cherry-Burrell […]
September 14, 2018
In today’s post, we wanted to focus on one Waukesha Cherry Burrell’s newest products- the Universal Twin Screw pump. Twin […]
January 17, 2017
While newer designs offer efficiency gains, magnetic drives, or are better suited for ultra-high purity or CIP applications, the C series pump’s simplicity and ability to handle most clean, low viscosity fluids.
March 31, 2015
To solve this problem, we are now excited to offer the Quattroflow 1200CV. Similar to the QF150, the QF1200CV combines controller, motor, and pump into an all-in-one unit that is perfect for customers with a tight space requirement. The compact version of the QF1200 uses a brushless DC motor that is similar to one used in the QF150 and affords use the same range, turndown, and low pulsation the Quattroflow pump is known for.
March 13, 2015
Today’s post will focus on what NPSHA is and how it applies to your sanitary pumping application. To begin, NPSHA stands for Net Positive Suction Head Available. NPSHA should not be confused for NPSHR, which stands for Net Positive Suction Head Required.
December 5, 2014
Failure of the mechanical shaft seal is the most common cause of pump downtime. The shaft seal is exposed to a wide variety of conditions and it can be quite difficult to identify why a seal failed. This post will take a look at the most common costs of seal failure and readdress how we reduce the frequency of seal failure.
October 16, 2014
This post will take a look at a trick to identify your old C series, as well as a few other ways Holland can help support your aftermarket sanitary pump needs.
August 26, 2014
Outside of efficiency, the low slip design of the Waukesha Universal series pump allows us to accomplish four useful things- it allows us to pump low viscosity fluids in low NIPA systems, it allows us to pump from vacuum vessels, self-prime, and meter fluids. This post will look at each of these four benefits and why they are important to system performance.
July 29, 2014
This post will focus on good sanitary pump piping practices and things you should keep in mind for your next sanitary PD pump install.